              B I O S - D R I V E   T A B L E   F O R   O M T I

               - -     5 5 2 0  / 5 5 2 7  M O D E L S      - -

 ---------------------------------------------------------------------------

                  BIOS# 1002570  / #1002571  10/R10
 ---------------------------------------------------------------------------
        W1  W2  W3  W4     Drive/Model      #Cylinder  #Heads    Write
                                                                 Precomp.
        ................................................................
        1   1   1   1      Maxtor XT1140     918        15         -
        1   1   1   0      CMI 6426          640        4         256
        1   1   0   1      Rodime 352        306        4          -
        1   1   0   1      Microsience HH312 306        4          -
        1   1   0   0      Seagate ST 4026   615        4         300
        1   0   1   1      Cynthia 570       987        7          -
                           Vertex V170                             -
        1   0   1   0      DMA/RICOH         612        2         400
                           Remov. 10Mb                             -
        1   0   0   1      Seagate ST 4038   733        5         300
        1   0   0   0      Seagate ST 213    612        2         256
        0   1   0   0      Miniscribe 3425   612        4         128
        0   1   1   0      Quantum Q540      512        8         256
        0   1   0   1      Seagate ST 4051   977        5         300
        0   1   0   0      CMI 342           612        4         256
                           Seagate ST 255                          -
        0   0   1   1      CDC 9415-36       697        5         256
        0   0   1   0      CMI 3212          612        2         128
                           Miniscr.3012/3212
        0   0   0   1      CMI 6640          640        6         256
                           Tulin 240
        0   0   0   0      CMI 5412          306        4         128
                           Lapine 3522
                           Otari 514
                           Seagate ST 412/ST212
                           Shugart 712
        1   1   1   1      Atasi 3085        1024       8          -
        0   1   1   1      Miniscribe 8438   612        4          -
                           Microscie. HH330
                           Microscie. HH738
        1   0   1   1      Peripheral 357R   615        4          -
        0   0   1   1      Lapine LT 300     616        4          -
        1   1   0   0      Piram V170        987        7          -
        0   1   0   1      Piram V185        1166       7          -
        1   0   0   1      Piram 514         1224       11         -
        0   0   0   1      Piram 519         1224       15         -
        1   1   1   0      Seagate ST251R    820        4          -
        0   1   1   0      Seagate ST277R    820        6          -
        1   0   1   0      Seagate ST4077R   1024       5          -
        0   0   1   0      Seagate ST4144R   1024       9          -
        1   1   0   0      Toshiba MK 53FB   830        5          -
        0   1   0   0      Toshiba MK 54FB   830        7          -
        1   0   0   0      Toshiba MK 56FB   830        10         -
        0   0   0   0      Seagate ST 238R   615        4          -
                           Miniscribe 3438
                           Tandon  364       615        4          -
............................................................................

                          O M T I - E R R O R  C O D E S
 ---------------------------------------------------------------------------
 Error
 Code   ----------------------      Description

 #1701-A       Failed RAM Diagnostic command.This command performs a pattern
               test on the internal controller buffer.

 #1701-B       Failed Controller Internal Diagnosics command. This command
               causes the controller to perform some internal diagnostics
               including ROM checksum and sequencer self test.

 #1701-C       Failed Test Drive Ready command. This command selects the
               logical units and returns a zero status during the status
               state to indicate that the unit is selectet, ready and seek
               or seek/command is complete.In the case of a cartridge unit,
               a zero status also indicates that a cartridge is installed.
               For fixed drives,the controller wait up to 50 seconds for the
               drive to come ready.

 #1701-D       Failed Recalibrate command. The drive is stepped toward the
               outside cylinder until either: (1) track zero is detectet,
               or (2) more steps have been issued than available cylinders
               for the device type.

 #1701-E       Failed Initialize Drive Characteristics command. This command
               sends a parameter list of all characteristics of the drive
               to the controller. There is no access to the drive during
               execution of this command.

 #1701-F       Failed Ready Capacity command. This command returns to the
               host ESDI drive physical parameters as available directly
               from the drive interface.

 ---------------------------------------------------------------------------

           O M T I - C O N T R O L L E R    I N S T A L L A T I O N

                                 M A N U A L

  1. Cabling Requirements: One 34-pin straight through cable. One 20-pin
     straight through cable.
  2. On winchester hard disk: Install drive select jumpers to lowest Drive
     Select DS0 or DS1
  3. On controller: If your drive is listet in the BIOS-Drive Table ,install
     jumpers W1 to W4 accordingly.
  4. Install the 34-pin drive interface cable to the J1 connector and the
     20-pin drive interface cable to the J2 or the J3 connector. Pin 1 is
     on the left side of the connector in both cases.
  5. Install the controller in any available slot, exept the one nearst the
     power supply ,on the motherboard. CAUTION: Power must be off !!
  6. Insert DOS diskette in Drive A: and turn on power
  7. Execute BIOS Low/High-level format routine in BIOS by executing
     DEBUG utility, then entering: g=c800:6
  8. Answer all questions properly. If your Drive is not listed in the BIOS
     drive table answer "N" to "Use defaults (Y/N?) prompt.
     See BIOS Format Routine Instructions flowchart.
  9. Create DOS Partitions by executing FDISK utility.
 10. Initialize the Drive by executing the command: Format C:/S
     (or Format D:)
 11. Your hard disk should now be bootable drive C: (or D:).
 ---------------------------------------------------------------------------

  1989 MRT
  
   Originalfassung von Robert Schaffner.
 
 Vernderte Texte die sich im Umlauf befinden entsprechen teilweise 
 nicht mehr meiner Orginalfassung und sollten besser gelscht werden.
 
 Insbesondere z.B: REPS.LZH
                 : REPA.LZH
                 : REPA_ST.LZH
                 
 Robert Schaffner @ OF2 (MausNet)
